Reflective Pavement Markers & Adhesive Pads


C80 Stimsonite Raised Reflective  Pavement MarkersStimsonite C80/88 Raised Pavement Markers (Reflective Road Markers)

Reflective from both directions and can be applied using our melt down thermoplastic pads. You can also use two part epoxy which is available in small tubes at Lowes or Home Depot. The blue 4" x 4" road markers are commonly used to mark fire hydrants but can be used for a variety of other purposes. We carry BLUE, YELLOW, WHITE, GREEN, RED, YELLOW/RED and a WHITE/RED. 

Our markers can be purchased with or without  a 5" x 5" melt down thermoplastic pad. Both are very easy to install. 

To use the thermoplastic pad just heat the asphalt with a torch, lay the pad down, heat the pad, and lightly press in the marker. The thermoplastic pads take a minute extra to install but are much more permanent. Click here for installation instructions and pictures of the melt down thermoplastic pads. 

If you are using these markers on a DOT (department of transportation) roadway you should verify that the C88 marker is approved in your area.


You can call us at (850) 934-3157 or email steve@reflectivestore.com with any questions. 

Road Markers with or without Adhesive 

Road Marker Adhesive Only


1 - 2 of 2 items
Sort By:

Reflective Raised Pavement Markers

Reflective Raised Pavement Markers

Reflective Stimsonite Road / Pavement Markers. Very bright and simple to install. Currently available in blue, yellow, white, yellow/red, green, red and white/red.

  • Price: $4.00

Road Marker Adhesive Pads - Thermo & Butyl

Road Marker Adhesive Pads - Thermo & Butyl

Adhesive Pads for Raised Pavement Markers - Torch Down Thermoplastic 5 x 5 for permanent applications. For adhering reflective road markers to pavement or cement. 

  • Price: $3.00